39706 - TEE Diesel Rail Car Train SBB RAm 501 (H0)

Most Important Facts

Article No. 39706
Gauge / Design type H0 / 1:87
Era III
Kind Powered Rail Cars

Prototype: Swiss Federal Railways (SBB) class RAm TEE diesel powered railcar train as the TEE "EDELWEISS", with the train route Amsterdam - Brussels North - Luxembourg - Strasbourg - Basle - Zürich. 4-part set in a crimson/beige basic paint scheme. 1 motor car, 1 compartment car, 1 dining car, 1 open seating car with a cab control compartment. Diesel powered railcar train road number 501. The train looks as it did at the end of the Fifties.

Model: This is a 4-part unit. It has an mfx+ digital decoder and extensive sound and light functions. It also has controlled high-efficiency propulsion with a flywheel, centrally mounted in the motor car. Two of the 3 driving wheelsets in each of the two 3-axle trucks are powered through cardan shafts. Traction tires. The train has factory-installed interior lighting in the compartment, dining, and open seating cars. The triple headlights and dual marker lights that change over with the direction of travel as well as the interior lighting will work in conventional operation and can be controlled digitally. The interior lighting in the baggage compartment of the motor car can be controlled separately in digital operation. The engine room lighting in the motor car, the cab lighting in the motor car and in the cab control compartment of the open seating car, and table lamps in the dining car can each be controlled separately in digital operation. Maintenance-free warm white and red LEDs are used for the lighting. There is a multi-conductor special current-conducting coupling with a guide mechanism between the powered railcar train units for a continuous electrical connection for the entire train. The train has a pickup shoe circuit with current pickup at the front of the train, either the motor car or the open seating car with a cab control compartment. The train has many separately applied details. The Scharfenberg coupler (non-working) is modelled at both ends of the train. The minimum radius for operation is 437.5 mm / 17-1/4". The train can also be run on Radius 1 if you ignore the clearance gauge.
Total length of the powered railcar train over the couplers approximately 113 cm / 44-1/2".

Highlights

  • Completely new tooling.
  • Heavy metal construction.
  • mfx+ World of Operation digital decoder with extensive sound and light functions.
  • Factory-installed interior lighting and table lamps, can be controlled digitally.
  • Factory-installed engine room and cab lighting included, can be controlled digitally.
  • Controlled high-efficiency propulsion with a flywheel in the motor car, 4 axles powered.

  • Digital Functions

    Control Unit Mobile Station Mobile Station 2 Central Station 1/2 Central Station 3/2*
    Mobile Station 2**
    Headlight(s)
    Interior lights
    Diesel locomotive op. sounds
    High Pitch Horn
    Direct control
    Sound of squealing brakes off
    Engineer’s cab lighting
    Low Pitch Horn
    Engineer’s cab lighting
    Operating Sounds 1
    Blower motors
    Table Lamps
    Light Function1
    Light Function 2
    Replenishing fuel
    Sanding
    Conductor's Whistle
    Doors Closing
    Brake Compressor
    Letting off Air
    Horn blast 1
    Horn blast 2
    Generator Sounds
    Rail Joints
    Switching maneuver
    Station Announcements

    * New features of the Central Station 2 (Part No. 60213, 60214 or 60215) with the software update 4.2

    ** New features of the Mobile Station 2 (Part No. 60657/66955) with the Software Update 3.55

    Find more Märklin explanation videos on our YouTube Channel

Γράψτε μια αξιολόγηση

Παρακαλώ συνδεθείτε ή δημιουργήστε λογαριασμό για να αξιολογήσετε

39706 - TEE Diesel Rail Car Train SBB RAm 501 (H0)

  • Κωδικός Προϊόντος: 039706
  • Διαθεσιμότητα: Διαθέσιμο
  • Aθήνα: Διαθέσιμο
  • Θεσσαλονίκη: Mη διαθέσιμο
  • 890,01€

Διαθέσιμες Επιλογές

Ετικέτες: New Item 2020, Insider Model 2020

Loading...